Kenco 8800 Series Level Gauge

Specifications:
PROCESS CONNECTIONS:
88M50 = 1/2" MNPT
88M75 = 3/4" MNPT
88F50 = 1/2" FNPT
88F75 = 3/4" FNPT
88FL50 = 1/2" Flange
88FL75 = 3/4" Flange
88FL1.0 = 1" Flange
88FL1.5 = 1 1/2" Flange
88FL2.0 = 2" Flange

HOUSING MATERIAL:
C = Zinc Plated Carbon Steel
A = All Wetted Parts 316 Stainless Steel with 304 Stainless Steel Frame
PC = All Wetted Parts PVC with Carbon Steel Frame
PS = All Wetted Parts PVC with Stainless Steel Frame

SIGHT TUBE MATERIAL:
5/8" O.D. Standard Glass

*Other Sight Tube Materials Available. Consult Factory For Options.

SEALS:
V = Fluorocarbon
A = Aflas
B = Buna-N
TES = PTFE Encapsulated Silicone
E = Ethylene Propylene

*Other Seal Materials Available. Consult Factory For Options.

SHIELD OPTIONS:

RH
The Rate/Height shield is used for checking the pump rate of a chemical pump. It is calibrated in QTS/24 Hrs., ML/Min and has a height scale labeled in 1/4" increments.



H
The Height shield is marked in 1/4" Increments and labeled every inch.



MRH
The Metric Rate/Height shield is calibrated in ML/Min and Liters/24 hrs. The height scale is labeled in 1 CM divisions.



MH
The Metric Height shield is marked in 1 CM increments and labeled every 5 CM.



M
The Expanded Metal shield is made from flattened expanded metal and is available in electroplated carbon steel or 304 stainless steel.



L
The Clear Polycarbonate shield has no markings, and provides 100% visibility as well as environmental protection.


CUSTOM SHIELDS: KENCO can provide custom scales to meet your needs. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory.

** IMPORTANT: Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.