Oil Level Controllers From Kenco Engineering
Oil Level Controllers From Kenco Engineering
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - sales@metexcorporation.com
Search This Site
(Search by Product Type i.e. Level or Brand Name i.e. Walchem)
|
Oil Level Controllers Versatile and Robust Mechanical Level Indication Solutions for Storage Tanks |
 |
K512 - Oil Level Controller The KENCO Oil Level Controllers are designed to control a constant oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. As the oil is consumed, the oil controller supplies the required amount of oil to maintain a proper level in the crankcase. << Learn More >> |
 |
KLCE - Oil Level Controller The oil level switch in the KLCE is an electric switch in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4" past the centerline, the switch will trip sending an alarm. << Learn More >> |
 |
KHL - Oil Level Controller The oil level switch in the KHL is an electric switch in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops or rises 3/4" past the centerline, the switch will trip sending an alarm. << Learn More >> |
 |
KSHL - Oil Level Controller The Kenco KSHL is constructed with 2 independent switches, one for high level alarm 3/4" above centerline and another for low level alarm at 3/4" below centerline. The oil level switches in the KSHL are electric switches in an explosion proof enclosure, rated for hazardous hydrogen gas environments. << Learn More >> |
 |
KSLL - Oil Level Controller The Kenco KSLL is constructed with 2 independent switches, one for low level alarm 5/8" below centerline and another for low level alarm at 7/8" below centerline. The oil level switches in the KSLL are electric switches in an explosion proof enclosure, rated for hazardous hydrogen gas environments. The float switches monitor the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops past the designated levels, the switches will trip sending an alarm. << Learn More >> |
 |
KLCM - Oil Level Controller The oil level switch in the KLCM is an electric switch in a CSA approved Class III, Type 4 enclosure. The float switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level controller housing. If the oil level in the crankcase drops 3/4" past the centerline, the switch will trip sending an alarm. << Learn More >> |
 |
KLCP - Oil Level Controller The KENCO Proximity Switch is installed into the divider block and is composed of a reed switch plus a magnet. When installed, the magnet rests against the divider block piston. The magnet is housed in the Proximity Switch body parallel to the reed switch. Each time the divider block pulses with a lubrication cycle, the piston moves the magnet, opening and closing the contacts of the reed switch. << Learn More >> |
 |
KLC - OIL Level Controller KENCO Oil Level Controllers are designed to control a constant oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. << Learn More >> |
 |
KES - Electric Oil Level Switch Oil level switches are designed as a safety device for the stationary engine or compressor. The oil level switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level switch housing. The engine or compressor constantly consumes the oil from the crankcase. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm. << Learn More >> |
 |
KPS - Pneumatic Oil Level Switch Oil Level Switches are designed as a safety device for the stationary engine or compressor. The Oil Level Switch monitors the oil in the crankcase. The level within the crankcase directly corresponds with the oil level in the oil level switch housing. The engine or compressor constantly consumes the oil from the crankcase. If the oil level in the crankcase drops past the designated level, the switch will trip sending an alarm. << Learn More >> |
 |
507 - Oil Level Controller 507 Series Oil Level Controllers automatically monitor and control the amount of oil in the lubricator housing. This keeps all of the working parts including the pump plungers submerged in oil to reduce wear and corrosion. when the level falls below the operational requirement, the low level safety switch will be activated. << Learn More >> |
|
Product Range PDF Files |
