Flow Switches, Flowline

Flow Switches From Flowline

Flow Switches, Flowline
Description
Specification
The general purpose liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface. The flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting. The adjustable set point makes calibration fast and simple.
Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPST relay
Supply voltage:
12-36 VDC
Process mount:
3/4" NPT (3/4" G)


>> Learn More
 
Flow Switches, Flowline
Description
Specification
The general purpose switch provides a total solution for low-flow pump or process protection with an integral relay controller and optional strobe flash alarm. Offered in liquid and gas configurations, the flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting.
Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPDT relay
Supply voltage:
120 / 240 VAC
Process mount:
3/4" NPT (3/4" G)


>> Learn More
 
Flow Switches, Flowline
Description
Specification
The general purpose liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface. Provided with a compact junction box for integral wiring termination, the flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting.
Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPST relay
Supply voltage:
12-36 VDC
Process mount:
3/4" NPT (3/4" G)


>> Learn More
 
Flow Switches, Flowline
Description
Specification
The general purpose compact relay controller accepts 1 sensor input with 1 relay output for low-flow pump or process protection. Package the NEMA 4X controller with our liquid or gas flow switch sensors. Its compact pump protection made simple.
Contact type:
(1) SPDT relay
Sensor inputs:
(1) flow switch
Supply voltage:
120 / 240 VAC
Enclosure rating:
IP65


>> Learn More
 
Flow Switches, Flowline
Description
Specification
The general purpose remote relay controller accepts 2 sensor inputs with 2 relay outputs for low-flow pump or process protection. Package the 35 mm DIN rail controller with our liquid or gas flow switch sensors. Its remote pump protection made simple.
Contact type:
(1-2) SPDT relays
Sensor inputs:
(1-2) flow switches
Supply voltage:
120 / 240 VAC


>> Learn More

 

Metex Corporation
Back to Top