|
 Features
VOLUTE CASE/BRACKET: High tensile gray iron casting with wear rings. SHAFT BEARINGS: Regreaseable heavy duty ball bearings, sealed on outboard side, lubricated at the factory. REPLACEABLE CASING WEAR RING: Prevents wear on casing and is easy to replace. MECHANICAL SHAFT SEAL: Self adjusting shaft seal available for temperatures up to 220 F. PUMP SHAFT: Manufactured from tough corrosion resistant 416 Stainless Steel.
These high head (to 400 feet) medium capacity (to 140 gpm) centrifugal pumps are available in standard fitted, all iron, and 316 SST construction. These centrifugal pumps are available only in base-mounted configurations. Suction ports are threaded 2" NPT and Discharge ports are 1-1/2" NPT.
Specifications
| Part |
Bronze Fitted |
All Bronze |
All Iron |
| Adapter |
Cast Iron |
Bronze |
Cast Iron |
| Casing |
Cast Iron |
Bronze |
Cast Iron |
| Wear Ring |
Bronze |
Bronze |
Steel |
| Shaft |
Steel |
Steel |
Steel |
| Shaft Sleeve |
Bronze |
Bronze |
#316 S. Steel |
| Impeller |
Bronze |
Bronze |
Cast Iron |
| Shaft Seal |
Carbon-Ceramic
S.Steel-Buna N |
Carbon-Ceramic
S.Steel-Buna N |
Carbon-Ceramic
S.Steel-Buna N |
Maximum Operating Conditions
|
Maximum Pumping Speed
|
3500 RPM |
| Maximum Pumping Temperature |
500 F |
| Maximum Inlet Pressure |
100 PSI |
| Maximum Case Working Pressure |
200 PSI |
 Base Mounted Units (Power Frames)
All pumps listed above are available in base mounted units with pump, base, motor and coupling. Inquire if you are interested in a base mounted unit.
Applications
-
Feed / Transfer
- High temperature water and oil heat transfer
- Boiler Feed and Condensate return
-
Circulation
- Hot and Cold water circulation
- Brine recirculation
- Hydraulic Oil circulation
-
Metering
- Additive metering
- Hot Water Spray
-
Pressure Maintenance
- Jockey Pumps
- Pressure Boosting
|
