Helical Gears for smooth, quiet running.
Self Priming due to close manufacturing tolerences.
Suction lift of up to 20 feet
Can be close coupled or base mounted with pump-motor unit.
Pump housings are of close grain cast iron.
3 Section doweled design insures alignment, efficiency and ease of field service.
Shafts are of ground and polished steel.
Full face thrust bearings are available in bronze, carbon, and cast iron.
Mechanical seals are of Buna, Viton, and Teflon.
Easy Maintenance
The 3-Section design of the Albany Pump combined with the unique slide fit of the bearings makes disassembly of the pump and replacement of individual components easy and simple.
By-pass model pumps ( integral relief valve ) can be converted to plain pumps (no by-pass) by interchanging pump covers (and vice-versa). The various bearings available can be interchanged in the field to suit the application requirement.
Performance
G Series - General Duty (0-250 PSI)
| Model |
Max. Capacity @ 1750 rpm |
Max. Diff. Press. |
Max. HP Req'd |
| 03G |
3.4 US/gpm |
250 psi |
3/4 hp |
| 05G |
5.3 US/gpm |
250 psi |
1.5 hp |
| 10G |
10.5 US/gpm |
250 psi |
2.5 hp |
| 18G |
18.1 US/gpm |
250 psi |
5 hp |
| 25G |
26.0 US/gpm |
250 psi |
5 hp |
| 35G |
35.0 US/gpm |
250 psi |
7.5 hp |
H Series - Heavy Duty (0-500 PSI)
| Model |
Max. Capacity @ 1750 rpm |
Max. Diff. Press. |
Max. HP Req'd |
| 03H |
3.4 US/gpm |
500 psi |
1.5 hp |
| 05H |
5.6 US/gpm |
500 psi |
2.5 hp |
| 10H |
11.4 US/gpm |
500 psi |
5 hp |
| 18H |
18.0 US/gpm |
500 psi |
7.5 hp |
| 25H |
25.0 US/gpm |
500 psi |
10 hp |
| 35H |
37.0 US/gpm |
500 psi |
15 hp |
