PosiFlow Feed Verification Sensor
From Walchem Corporation

PosiFlow Feed Verification Sensor

Feed verification has never been better!  The PosiFlow® Sensor will verify that your metering pump is truly moving liquid into the system and has not lost prime.

• Provides accurate and non-intrusive flow verification.
  

• No moving parts in the sensor eliminates any concern of plugging, leaking or jamming of the flow path or sensing mechanism.
  

• Sends out a signal with every stroke as long as there is liquid pumping against pressure.
  

• EW-Y Series pumps take the PosiFlow® signal directly, monitoring the feedback against pump operation.
  

• Install PosiFlow® on the discharge side of the metering pump, and connect to the digital input option card of the WebMaster.
  

  • Supplies a contact closure to the WebMaster every time the metering pump pulses and the sensor detects fluid movement.

• Controller will send an alarm if the pump should be operating but no flow pulses are received.

• Controller can also use a programmable volume-per-stroke value to totalize the volume of chemical feed.

PART NUMBER	DESCRIPTION
FCP-1VC	PosiFlow Sensor, VC
FCP-1VE	PosiFlow Sensor, VE
FCP-1PC	PosiFlow Sensor, PC
FCP-1PE	PosiFlow Sensor, PE

 

	Manual		Trouble Shooting
	EHxpert		FAQs, Installation & Wiring