Total Dissolved Solids Monitor RO-CHECK™ POU TDS Monitor from Myron L Company

Total Dissolved Solids (TDS) are the total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to as parts per million (ppm). Total Dissolved Solids (TDS) is directly related to the purity of water and the quality of water purification systems and affects everything that consumes, lives in, or uses water, whether organic or inorganic, whether for better or for worse.

The innovative Myron L RO-CHECK (U.S. Patent # 4,762,611) reliably monitors total dissolved solids 24 hours a day. A quick glance at the display assures RO users of their water TDS quality. Should membrane failure or other problems cause TDS to rise above the set point, the words "CHECK SYSTEM" flash in the LCD. This silent indicator alerts, rather than alarms, the user that service may be required.

Easily installed on most popular faucets, the RO-CHECK features 16 set point choices and is ideal for monitoring water of almost any TDS quality.

Two display modes:

RO WATER TDS is below set point

CHECK RO WATER SYSTEM TDS is above set point

Features:

• High Tech liquid crystal display

• Fits 1.250" diameter faucets

• Runs one year continuously on one alkaline 9 volt battery (not supplied)

• 16 TDS set points, 30-750 ppm, suitable for almost any water

• ±10% accuracy at 68°F (20°C)

• Single flow-through sensor

• 316SS electrodes double-sealed to prevent leaks

• Includes Parker Hannifin fittings for 1/4" tubing

• 5' cable with fast telephone-type connector

• One-year limited warranty

RO CHECK Data Sheet