|
Iwaki Air TC-X500 Series 2" AODD Pump
|
The Iwaki Air TC-X500 Series pumps offer excellent flow rates and a new heavy dutyand compact body design. They can operate at variable air pressures and are suited for both start/stop and fully continuous duty pumping applications. They can easily handle high head pressure and long discharge lines.
| Maximum Flow Rate: 190.2 GPM (720 LPM) |
| Maximum Discharge Head: 280 FT (85 m) |
| Available in: Stainless Steel, Aluminum, Polypropylene & PVDF |
| Shuttle Valve type: Coil Spring Air Spool |
| |
|
Non-Metallic
 |
Metallic
|
|
Specifications:
| Material Code: |
A"X"
(-FL) |
S"X"
(-FL) |
F"X"
(-FL) |
AT"X"
(-FL) |
ST"X"
(-FL) |
FT"X"
(-FL) |
| Max Flow Rate: |
190.2 GPM (720 LPM) |
132.1 GPM (500 LPM) |
| Max Operating Pressure: |
125 PSI (0.85 MPa |
100 PSI (0.7 MPa) |
| Max Air Consumption: |
212 scfm (6000 L/min) |
177 scfm (5000 L/min) |
| Supply Air Pressure Range: |
14 to125 PSI (0.1 to 0.85 MPa) |
22-100 PSI (0.15 - 0.7 MPa) |
| Liquid Discharge Volume per Cycle: |
118 oz (3500 ML) |
44 oz (1300 ML) |
Connection Size
(Suction x Discharge): |
NPT 2" |
| Weight: |
77.2 lbs
(35 kg) |
121.3 lbs (55 kg) |
77.2 lbs
(35 kg) |
121.3 lbs (55 kg) |
|
Pump Body Material Code:
A - Aluminum
S - Stainless Steel
F - Fe (Cast Iron)
P - Glass Fiber Reinforced Polypropylene (PPG)
V - PVDF (Kynar®)
T - PTFE (Teflon®)
|
"X" Diaphragm material options:
T-PTFE (Teflon®)
H-TPEE (Hytrel™)
C-CR (Neoprene™)
N-NBR (Buna)
S-TPO (Santoprene®)
V-FKM (Viton®)
E- EPDM (Nordel™) |
Teflon®, Hytrel®, Neporene™, Viton® are registered trademarks of DuPont
Santoprene® is a registered trademark of Exxon
Nordel™ is a registered trademark of Dow
Kynar@ is a registered trademark of Archema
TC-X500 Series Datasheet
TC-X500 Series Dimensions
TC-X500 Series Operation Manual
TC-X500 Series Service Manual
|
