Mighty Module
Mighty Module MM1700 Frequency Input Dual Limit Alarm
MM1700 Frequency Input Dual Limit Alarm
Description The MM1720 monitors a frequency input signal and provides two sets of spdt, 5 A alarm relays with two independently adjustable setpoints. Each setpoint has a set of red/green LEDs to indicate alarm status. When the input is between the setpoints, the relays are normally de-energized. When the signal exceeds a particular setpoint, the relays become energized. To provide a fail-safe operation (loss of power resulting in an alarm state), select Option RR. The module can be supplied as a HI/HI, HI/LO, or LO/LO alarm (HI/LO supplied if not specified). Standard deadband on both alarms is fixed at 0.5% of span (Option A provides adjustable deadband of 0.5% to 100% of span.) Option D, latching alarms, has no deadband control. Once the limit has been reached, the alarm latches and power to the module must be momentarily interrupted to reset the alarm. The wide range of input sensitivity allows the MM1720 to be driven from low level magnetic pickups as well as logic level signals. A threshold adjustment sets the minimum input amplitude the module will process. This allows the user to trade off sensitivity versus noise rejection. An optional pullup resistor (Option P) permits use with contact-closure or open-collector inputs. The module includes filtering and conditioning to reduce susceptibility to transients and noisy operations. Features
Typical Applications Flow, speed of motors, conveyors, etc., control HI/LO limit alarm. Mounting The module is designed to plug into a standard 11-pin relay socket. Part number MP011 is a plastic socket suitable for mounting on a flat surface or 2 3/4 inch wide PVC snap track (TRK48). Use CLP-1 hold-down clip if needed. A Killark HK Series explosion-proof housing dome and 11-pin socket is available (HKB-HK2D-11). A DIN rail mounted socket (P/N DMP011) is available for 35mm symmetrical rail. Specifications
|