Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

Eutech Instruments

Eutech Instruments

alpha-pH500 2-Wire LCD Display Transmitter
From Eutech Instruments

2-Wire,pH,ORP,Conductivity,Dissolved,Oxygen,Temperature,Transmitters,Eutech,Instruments

Two Wire Transmitter

alpha,pH500,2-Wire,LCD,Display,Transmitter,Eutech,Instrumentsalpha-pH500 2-Wire LCD Display Transmitter

  • New Design with Isolated Output - The alpha 500 series transmitter prevents output interference due to electrical noise or leakage from the input source. Cross talk between multiple transmitters in the same loop is also eliminated.

  • NIST or USA pH BUFFER options - alpha pH500 Transmitter allows user to select USA (4.01, 7.00 or 10.01) or NIST (4.01, 6.86 or 9.18) pH buffer standards during calibration.

  • Out-of-range Output Current Indicator - Monitor your process effectively using the optional out-of-range current indicator. When the monitored value exceeds the measurement range, the alpha 500 Transmitter indicates an out-of-range measurement by emitting a 3.8mA output current.

  • Hold Output Current Indicator - Use the optional HOLD output current indicator for your process control purposes. Configure the transmitter to emit the pre-set 22 mA output current to indicate ‘HOLD’ mode during calibration or set up mode.

  • Symmetrical Mode of Operation - Unique mode available in the Eutech alpha pH500, allow the transmitters to be operated in environments with electrical interferences. Simply configure the transmitter to the symmetrical mode and attach a potential matching pin.

  • Scalable 4/20 mA Current Output - Assign pH or ORP values at 4 and 20 mA for better resolved output at chart recorder or other peripheral devices.

  • Custom Dual Display LCD - Primary and secondary display are available for simultaneous display of pH, ORP and Temperature values. Allows instantaneous viewing of measured readings and transmitter set up configurations.

  • Easy Push Button Operation - Simply calibrate or adjust setup configuration with just a few touches of the buttons. The alpha pH500’s intelligent program in prompts respective buffers for easy calibration.

  • Temperature Compensation - Compensates variance in the measured readings due to temperature fluctuations, either Automatically (with Pt 100) or Manually (Process and Calibration temperatures can be set separately).

  • Panel or Wall Mount, IP65 Weatherproof Housing - The alpha 500 series transmitter has the flexibility to be mounted on the wall or in a control panel. In addition, the IP65 rated housing allows the transmitter to be installed outdoors or indoors. Mounting accessories are included for both types of mounting.

  • DC Voltage - Transmitters operate on a 12 to 24V D.C. power supply and multiples can be installed in a serial loop. Operations are not disrupted even if one of the transmitters requires service.

alpha,pH500,2-Wire,LCD,Display,Transmitter,Eutech,Instruments alpha 500 Transmitter Series

alpha,pH500,2-Wire,LCD,Display,Transmitter,Eutech,Instruments alpha 550/560 Monitor/Controller Series

alpha,pH500,2-Wire,LCD,Display,Transmitter,Eutech,Instruments Instruction Manual

Specifications:

Product Specification

Description
pH range 0.00 to 14.00 pH
Resolution & Accuracy 0.01 pH / ±0.01 pH
mV range
-1000 to 1000mV
Resolution & Accuracy
1 mV / ± 2mV
Temperature -10 °C to 110 °C
Resolution & Accuracy 0.1 °C / ±0.5 °C
Temp. Compensation
Auto (Pt 100) / Manual (0 to 100 °C)
Temp. Coefficient
0 to 10 °C (Selectable)
Calibration Point Up to 2 points
Calibration Buffers USA : 4.01, 7.00, 10.01;
NIST : 4.01, 6.86, 9.18
Input Asymmetrical / Symmetrical
Transmitter Output Range 4.0 to 20.0 mA
Over/ Under Range Current Output 3.8 mA : 'ON' selects 3.8 mA
'OFF' selects 4 mA (under range)
selects 20mA (over range)
Hold Current Output 22mA : 'ON' selects 22 mA
'OFF' selects last measured current value
Display Dual Display Custom LCD
Power Requirements
12 to 24 VDC
Load Resistance Max. 600 W
Ingress Protection IP65 protection against dust and water jets
(Wall or panel mount)
Dimension 96 x 96 x 66 mm (3.78 x 3.78 x 2.6 inch)
Weight 210 g

METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch