MultiHop Modbus Data Radios
The Sure Cross® MultiHop Modbus Data Radios extend the range of Modbus networks. Each radio may be set to act as either a master radio, a repeater radio, or a slave radio. Models are available with built-in discrete and analog I/O, which can be accessed using the Modbus protocol.
MultiHop Modbus Data Radios without I/O
Use the following manuals for the MultiHop Data Radios.
Quick Start Guide: 152653
| Model |
Frequency |
Transmit Power |
Datasheet |
| DX80DR9M-H |
900 MHz |
The 900 MHz MultiHop Radios may be configured, using a DIP switch, to transmit at 1 watt or at 0.25 watts.
The 2.4 GHz MultiHop Data Radios only transmit at 0.063 watts, or 18 dBm.
Serial interface: User selectable between RS-485 or RS-232 |
148345 (English)
168840 (French)
|
| DX80DR2M-H |
2.4 GHz |
MultiHop Modbus Data Radios with I/O
Use the following manuals for the MultiHop Modbus Data Radios with I/O.
Quick Start Guide: 152653
Product Manual: 151317 (English)
MultiHop Radio Configuration Tool documentation: 150473
MultiHop Register Parameters Guide: 155289
Configuration is made easy with the MultiHop Radio Configuration Tool, a software program similar to the User Configuration Tool used with the DX80 wireless products. Download the latest released version for either 32-bit or 64-bit computers.
For instructions how to determine if you are running a 32-bit or 64-bit version of Microsoft Windows, go to this Microsoft support page.
The MultiHop Modbus Data Radios with I/O are available with a mix of discrete, analog, and other I/O. Models ending in C use external terminal blocks instead of internal terminal blocks.
|
The IP67 housing with internal terminal blocks
|
The low-profile IP20 housing with external terminal blocks.
|
The IP65 "E" housing
|
| Model |
Frequency |
Base |
I/O |
Datasheet
|
| DX80DR9M-H1 |
900 MHz |
IP67 |
Inputs: Four discrete, two 0-20 mA analog, one thermistor, one counter
Outputs: Two NMOS discrete
Switch Power: Two
Serial interface: RS-485 |
|
| DX80DR9M-H1E |
IP65 |
| DX80DR2M-H1 |
2.4 GHz |
IP67 |
| DX80DR2M-H1E |
IP65 |
| DX80DR9M-H2 |
900 MHz |
IP67 |
Inputs: Four discrete, two 0-20 mA analog
Outputs: Four sourcing discrete, two 0-20 mA analog
Serial interface: RS-485
|
|
| DX80DR2M-H2 |
2.4 GHz |
IP67 |
| DX80DR9M-H3 |
900 MHz |
IP67 |
Inputs: Two discrete, four thermocouple, one thermistor (internal)
Outputs: Two NMOS discrete
Serial interface: RS-232 |
|
| DX80DR9M-H3E |
IP65 |
| DX80DR2M-H3 |
2.4 GHz |
IP67 |
| DX80DR2M-H3E |
IP65 |
| DX80DR9M-H4 |
900 MHz |
IP67 |
Inputs: Four 3-wire Pt100 RTD
Serial interface: RS-232 |
|
| DX80DR9M-H4E |
IP65 |
| DX80DR2M-H4 |
2.4 GHz |
IP67 |
| DX80DR2M-H4E |
IP65 |
| DX80DR9M-H5 |
900 MHz |
IP67 |
Inputs: Four sinking discrete, four 0-20 mA analog
Outputs: Two NMOS discrete
Switch Power: Two
Serial Interface: RS-485
|
|
| DX80DR2M-H5 |
2.4 GHz |
| DX80DR9M-H6 |
900 MHz |
IP67 |
Inputs: 1-Wire serial interface for one 1-wire serial sensing device |
|
| DX80DR2M-H6 |
2.4 GHz |
| DX80DR9M-H12 |
900 MHz |
IP67 |
Inputs: Two discrete, two 0-20 mA analog, one thermistor, one SDI-12 or counter
Outputs Two NMOS discrete
Switch Power: Two
Serial interface: RS-485 |
|
| DX80DR2M-H12 |
2.4 GHz |
| DX80DR9M-DCLATCHE |
900 MHz |
IP65 |
Inputs: Two sinking discrete
Outputs for DC Latch: DC Latch |
|
| DX80DR2M-DCLATCHE |
2.4 GHz |
MultiHop Modbus Data Radios with I/O (Board Only Models)
|
 |
|
|
MultiHop Modbus Data Radio Board Module |
|
| Model |
Frequency |
I/O |
Datasheet |
| DX80DR9M-HB1 |
900 MHz |
Inputs: Two NPN discrete, two 0 to 20 mA analog
Outputs: Two NMOS discrete
Switch Power Outputs: Two
|
154365 (English)
168841 (French)
|
| DX80DR2M-HB1 |
2.4 GHz |
| DX80DR9M-HB2 |
900 MHz |
Inputs: Two PNP discrete, two 0 to 20 mA analog
Outputs: Two PNP discrete, two 0 to 20 mA analog
|
156853 |
| DX80DR2M-HB2 |
2.4 GHz |
