DX99 FlexPower Nodes Polycarbonate Housing Models
The polycarbonate DX99 FlexPower Nodes must be powered by the DX81H Battery Module (sold separately).
-
State-of-the-art combination of wireless communication, battery technology, and intrinsically safe electronics
-
Discrete, analog, and temperature input types are available
-
Battery-based power supply provides power for third-party 4 to 20 mA and NAMUR process sensors
-
Polycarbonate housing devices require the DX81H Battery Module
To simplify the certifications, we have created a reference guide that lists all CSA and ATEX certifications by model, defines the environments, and explains the codes used on ATEX certificates.
Control Drawings: 141513
CSA Certificate of Compliance
ATEX Certificate of Compliance
|
Certified for operation in the following locations:
-
Class I, Division 1, Groups A, B, C, D
-
Zone 0 (Group IIC)
|
Model |
Frequency |
Boost Power |
I/O |
Datasheet
|
DX99N9X2S2N0M2X0A1 |
900 MHz |
10 V |
Discrete: Two discrete inputs
Analog: Two analog inputs (0-20 mA) |
|
DX99N9X2S2N0M2X0A2 |
18 V |
DX99N9X2S2N0V2X0A1 |
10 V |
Discrete: Two discrete inputs
Analog: Two analog inputs (0-10 V) |
DX99N9X2S2N0V2X0A2 |
18 V |
DX99N2X2S2N0M2X0A1 |
2.4 GHz |
10 V |
Discrete: Two discrete inputs
Analog: Two analog inputs (0-20 mA) |
DX99N2X2S2N0M2X0A2 |
18 V |
DX99N2X2S2N0V2X0A1 |
10 V |
Discrete: Two discrete inputs
Analog: Two analog inputs (0-10 V) |
DX99N2X2S2N0V2X0A2 |
18 V |
DX99N9X2S2N0T4X0A0 |
900 MHz |
n/a |
Thermocouple: Three thermocouple inputs, one thermistor input
Discrete: Two discrete inputs |
|
DX99N2X2S2N0T4X0A0 |
2.4 GHz |
DX99N9X2S0N0R4X0A0 |
900 MHz |
RTD: Four inputs |
|
DX99N2X2S0N0R4X0A0 |
2.4 GHz |
To order the internal antenna models, replace the "S" as the 9th digit with a "W." Internal antennas require an additional week for manufacture and shipping. For example, DX99N9X2S2N0M2X0A1 is the model with the external antenna and DX99N9X2W2N0M2X0A1 is the internal antenna model.