Hayward Flow Control
Plastic Pressure Regulators from Hayward
|
Easy to Set Pressure: Hayward plastic pressure regulators can be set by hand, no tools are needed, to control downstream pressures from 5 to 75 psi. Each size regulator is designed to cover this complete pressure range with just one, non-wetted, plastic coated spring. There is no need to change springs for different pressure ranges as with ordinary regulators. Molded Gauge Port: An integral molded 1/4" NPT gauge port on the valve body makes installation of a gauge to monitor downstream pressure easy. No drilling or extra fittings are needed. No Corrosion Failure: These all plastic pressure regulators have no metal parts and will never fail, jam or stick because of rusted or corroded components. They do not require painting or epoxy coating to survive corrosive environments.
|
|||||
Reliable Pressure Regulation: Hayward plastic pressure regulators prevent downstream pressure from exceeding a preset pressure. When the upstream pressure increases beyond the set pressure of the regulator, the plastic pressure regulators prevent the downstream pressure from exceeding the set pressure.
