 The mixing pump tube MP-PP combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples:
Emulsions, suspensions, dispersions, paints and lacquers.
Features:
-
Suitable for mixing and pumping of corrosive and neutral, thin-bodied up to slightly viscous liquids in non-hazardous locations
-
Two functions ("pumping" and "mixing and pumping") in one unit
-
Optional with electric or air driven motors
-
No grease fillings
-
Modular, service friendly design
-
Operation mode "pump only" or "mix and pump" can be changed without removal by means of a hand lever
-
High pump and mix capacity to ensure best homogenization and emptying within a short time
-
Suitable for drums with bung hole or IBC-container with dome cap as well
-
Lube-free pump tube, thus no contamination of the liquid
Sealing system:
Mechanical seal (MS) or sealless construction (SL)
Type of impeller:
Radial-flow impeller (L) for low delivery rate and high delivery head
Immersion length:
39" (1000 mm) and 47" (1200 mm)
(Special lengths on request)
Technical Data
| Materials |
MP MS-PP |
MP SL-PP |
| Housing: |
Polypropylene |
Polypropylene |
| Seals: |
- |
Viton® |
| Mechanical seal: |
- |
Carbon, SiC, Viton®,
HC-4 (2.4610) |
| Bearing: |
ETFE/PTFE |
ETFE/PTFE |
| Drive shaft: |
Stainless steel (316) |
Stainless steel (316) |
| Impeller: |
PP |
PP |
| Type of impeller: |
Radial-flow (L) |
Radial-flow (L) |
| Nominal diameter: |
1.96 in
50 mm |
1.96 in
50 mm |
| Temperature of medium: |
up to 122 °F
up to 50 °C |
up to 122 °F
up to 50 °C |
| Hose connection: |
1 1/4" male BSP |
1 1/4" male BSP |
| Length: |
39" / 47"
1000 / 1200 mm |
39" / 47"
1000 / 1200 mm |
| |
|
|
| Operating data |
Radial-flow (L) |
|
| Delivery rate:* |
up to 24 GPM
up to 90 l/min |
|
| Delivery head:* |
up to 69 ft.
up to 21 m wc |
|
| Viscosity:** |
up to 1100 cps
up to 1100 mPas |
|
Motors
Motor B 36 / MI 4
Motor B 36-SC / MI 4 E
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Optionally with infinitely variable speed controller for a controlled flow rate
- Internally ventilated
- 110-120 V / 60Hz,
640 W / 0.85 HP
- Open drip proof in accordance with protection class IP 24, double insulated, 16' (5 m) cord and plug
|
Motor B 28
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Internally ventilated
- 110-120 V / 60Hz,
800 W / 1.07 HP
- Open drip proof, double insulated, 16' (5 m) cord and plug
|
Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.
- Robust and powerful
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 110-120 V / 60Hz,
510 W / 0.68 HP (B 55-T-5)
700 W / 0.93 HP (B 55-T-7)
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16' (5 m) cord and plug
|
Motor MD-1 / MD-2
 |
Compact compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Optionally with (MD-2) / without (MD-1) manual operation
- Delivery flow is easy to control
- 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)
|
Motor 4/GT
 |
Light, easily handled compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Delivery flow is easy to control
- 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)
|
Motor MA II 3-12V
|
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Robust and powerfull
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 12 V DC,
260 W / 0.35 HP
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10' (3 m) cord with alligator clips
|
Catalogue Pages Downloads
Lutz Pump Catalogue
Performance Curves Downloads
Performance Curve Pump MP-PP with Motor 4/GT (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B28 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B36/MI 4 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B55-T-5/MA II 5 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor MA II 3 - 12V (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor MD-1/MD-2 (pdf, 0.06 MB)
|
