 The pump tube RE-SS is suitable for applications, in which highly toxic, expensive and sensitive non-flammable liquids need to be drained almost completely from drums and containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples:
Alaun, borax, Diesel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc.
Features:
-
Suitable for corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
-
Optimized drum drainage with almost no residue left in drum.
-
Optional with electric or air driven motors
-
No grease fillings
-
Also available in physiologically safe version (PU)
-
No problematic tipping for emptying of remaining residual liquid
-
Maximum product utilisation at reduced drum cleaning and waste disposal costs
-
No leakage at inclined position or removal of the pump tube
-
Non-lubrictated, thus no contamination of the liquids pumped
Sealing system:
Mechanical seal (MS)
Type of impeller:
Radial-flow impeller (L) for low delivery rate and high delivery head.
Immersion length:
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)
(Special lengths on request)
Technical Data
| Materials |
RE-SS MS |
| Housing: |
Stainless steel (316) |
| Seals: |
Viton® (FEP coated) |
| Mechanical seal: |
Carbon, Ceramic, PTFE, HC-4 (2.4610) |
| Bearing: |
pure Carbon |
| Drive shaft: |
Stainless steel (316) |
| Impeller: |
ETFE |
| Type of impeller: |
Radial-flow (L) |
| Nominal diameter: |
1.61 in
41 mm |
|
Temperature of medium:
|
up to 212 °F
up to 100 °C |
| Hose connection: |
1 1/4" male BSP |
| Length: |
27" /39" / 47"
700 / 1000 / 1200 mm |
| |
|
| Operating data |
Radial-flow (L) |
| Delivery rate:* |
up to 20 GPM
up to 75 l/min |
| Delivery head:* |
up to 62 ft.
up to 19 m wc |
| Viscosity:** |
up to 1200 cps
up to 1200 mPas |
Motors
Motor B 36 / MI 4
Motor B 36-SC / MI 4 E
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Optionally with infinitely variable speed controller for a controlled flow rate
- Internally ventilated
- 110-120 V / 60Hz,
640 W / 0.85 HP
- Open drip proof in accordance with protection class IP 24, double insulated, 16' (5 m) cord and plug
|
Motor B 28
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Internally ventilated
- 110-120 V / 60Hz, 800 W / 1.07 HP
- Open drip proof, double insulated, 16' (5 m) cord and plug
|
Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7
 |
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.
- Robust and powerful
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 110-120 V / 60Hz,
510 W / 0.68 HP (B 55-T-5)
700 W / 0.93 HP (B 55-T-7)
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16' (5 m) cord and plug
|
Motor MD-1 / MD-2
 |
Compact compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Optionally with (MD-2) / without (MD-1) manual operation
- Delivery flow is easy to control
- 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)
|
Motor 4/GT
 |
Light, easily handled compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Delivery flow is easy to control
- 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)
|
|
